StructuraHardware reference · working edition

Connected hardware / product

Samsung 970 EVO 1 TB

The 1 TB capacity model in the same 970 EVO product family.

Sourced reference · provisional

Inside

Use the connections below to see where this entity fits. No physical layout has been established for this entry.

Overview

The 970 EVO uses three distinct descriptions: M.2 for physical format, PCIe for its interface, and NVMe for its protocol. This reference describes the manufacturer-declared model, not an inspected specimen.

Model: MZ-V7E1T0

Document context: 2018 · April 2018 datasheet revision, not an inferred release date.

Connections

Each arrow is a scoped assertion. Select its label for evidence, or its destination to keep exploring.

Claims, comparisons and evidence

Identity and description

comparison · qualified

Capacity changes more than storage space

Samsung specifies the 500 GB model with 512MB LPDDR4 and the 1 TB model with 1GB LPDDR4. Listed sequential reads are up to 3,400 and 3,400 MB/s respectively. Sequential writes are up to 2,300 versus 2,500 MB/s with TurboWrite; beyond the TurboWrite region, the listed rates are 600 versus 1,200 MB/s.

Manufacturer specification comparison, not measurements on our hardware. Firmware, host and TurboWrite conditions matter. Datasheet tests use IOmeter 1.1.0, Windows 10 and an Intel Core i7-7700K. Raw source units retained.

Source and assessment

Samsung V-NAND SSD 970 EVO — 2018 Data Sheet, Revision 1.0 · p. 5, DRAM and performance table, footnote 3; p. 6, test configuration

Evidence role: supports. Manufacturer up-to performance; TurboWrite-dependent writes; no independent measurements. Raw DRAM units retained.

Compare with Samsung 970 EVO 500 GB (MZ-V7E500) →

Relationship evidence is attached to each arrow above. These assessments do not constitute canonical approval.